CHEVY SBC 350 5.7L HP RV STAGE 3 443/465 LIFT CAM CAMSHAFT & LIFTERS KIT MC1988



You are buying a BRAND NEW Engine Pro MC1988 Hydraulic Flat Tappet Camshaft! Also included is a SET of (16) HA817 Lifters!
This is for Chevy SBC 262, 302, 307, 327, 350, 400 C.I. With good low to mid torque and a noticeable idle.
Camshaft Specifications:
Stage: 3
Duration @ .050": Intake: 214 Exhaust: 224
Advertised Duration: Intake:288 Exhaust: 298
Valve Lift: Intake: .443 Exhaust: .465
Lobe Separation: Intake: 107 Exhaust: 117
Power Range: 2000-4500
Idle: Fair
Comment: Good low to mid torque. Noticeable Idle.
General Information for Stage 3 Camshafts:
Characteristics:
Idle Quality: Fair with some lope
Torque: Mid-Range 2400-3200 RPM
Fuel Economy: Fair
Recommendations:
Towing: Not Recommended
Racing: Mild Bracket Racing
Computer Controlled Vehicles: Modified computer chip may be required to compensate for low vacuum
Transmission: Stock Automatic or Manual
Compression Ratio: 10.3:1 or less. check valve to piston clearance
PLEASE NOTE: THE PICTURE SHOWN IS GENERIC AND MAY NOT SHOW THE EXACT CAM BEING SOLD
NOTE: Anytime you install a new camshaft, it should always have new lifters installed as cams and lifters create a wear pattern as they mate together.
Shipping Information: We have multiple shipping locations across the United States from Tennessee to Alaska! Shipping is standard UPS, and generally arrives very quickly! We CAN NOT ship to a PO box. Please leave us your physical address when ordering.
Camshafts and lifters are guaranteed to be straight, on size, and to correct lift, index and duration. There is no guarantee on camshafts and lifters after engine is started. Customer has the privilege of checking and inspecting camshafts and lifters at the time of installation. If camshafts and lifters do not meet your level of satisfaction, DO NOT INSTALL! Returns only accepted if camshafts and lifters has not been installed. No guarantee once engine has been run.